working on TDC 3000 Honeywell

Règles du forum
A lire impérativement : Réglement du forum
Avatar du membre

Topic Author
ammaryasir
Membre
Messages : 3
Enregistré le : ven. juil. 07, 2017 5:12 pm
Contact :

working on TDC 3000 Honeywell

Message non lu par ammaryasir » lun. juil. 10, 2017 12:03 pm

I am working on TDC 3000 Honeywell in a fertilizer sector. On our DCS APM card no 11 is showing status of "Partial Failure". So pleas tell me how to rectify it? Restore/Save/Reload option will work? or Slot reset option?

Avatar du membre

nadir
Membre
Messages : 4
Enregistré le : sam. mars 12, 2016 8:32 pm
Contact :

Re: working on TDC 3000 Honeywell

Message non lu par nadir » lun. juil. 10, 2017 12:04 pm

hello
In my opinion you lost whatever point digital out in and analog out in
So you either have to replace the slot or create another point to replace them

Avatar du membre

Topic Author
ammaryasir
Membre
Messages : 3
Enregistré le : ven. juil. 07, 2017 5:12 pm
Contact :

Re: working on TDC 3000 Honeywell

Message non lu par ammaryasir » lun. juil. 10, 2017 3:29 pm

Assalam o alaikum.sir thank you.actually we have some times soft failure which is familiar for me.but part failure was my first observation.so actually in field side our team open valve termination so reason os now clear.

Avatar du membre

nadir
Membre
Messages : 4
Enregistré le : sam. mars 12, 2016 8:32 pm
Contact :

Re: working on TDC 3000 Honeywell

Message non lu par nadir » lun. juil. 10, 2017 3:30 pm

You mean that the problem was on the valve actuator

Avatar du membre

Topic Author
ammaryasir
Membre
Messages : 3
Enregistré le : ven. juil. 07, 2017 5:12 pm
Contact :

Re: working on TDC 3000 Honeywell

Message non lu par ammaryasir » mer. juil. 12, 2017 2:55 pm

I/P Converter terminations.

Avatar du membre

nadir
Membre
Messages : 4
Enregistré le : sam. mars 12, 2016 8:32 pm
Contact :

Re: working on TDC 3000 Honeywell

Message non lu par nadir » mer. juil. 12, 2017 3:35 pm

ok
Change the equipment or check it reel 6k ohm

Avatar du membre

nadir
Membre
Messages : 4
Enregistré le : sam. mars 12, 2016 8:32 pm
Contact :

Re: working on TDC 3000 Honeywell

Message non lu par nadir » mer. juil. 12, 2017 3:43 pm

architecture_01dec04.jpg
legacy systéme : Read data of equipment different from honeywell
Vous n’avez pas les autorisations nécessaires pour voir les fichiers joints à ce message, pour avoir accès à tous les liens et télechargement, vous devez adhérer un groupe Donateur+ , Support , Medianaviste+ ou Medianaviste++ pour accéder et télecharger le contenu ..

Avatar du membre

MIdev
Fondateur du forum
Fondateur du forum
Messages : 5814
Enregistré le : jeu. avr. 30, 2015 12:53 pm
A remercié : 1924 fois
A été remercié : 641 fois
Contact :

Re: working on TDC 3000 Honeywell

Message non lu par MIdev » dim. oct. 22, 2017 2:56 pm

If you like this forum and appreciate my work, you might want to buy me a coffee
Si vous aimez notre travail et souhaitez montrer votre appréciation Image

Abonnez-vous


Répondre

Last 20 Members Who Visited This Topic. Total 2 visits

Avatar du membre ammaryasir (1)

Retourner vers « Autre »

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 4 invités