Page 4 sur 6
Re: Connect diag tool 4.1.0
Posté : lun. janv. 30, 2023 7:38 pm
par Pixon12
Hi. My name is Sina. I went to the micom test & made a mistake. I touched "clrcnf" in micom test menu & this message appeared: "connect diag tool"
Version is 4.1.0
Please help me. I cant download files in this forum.
Re: Connect diag tool 4.1.0
Posté : lun. janv. 30, 2023 7:45 pm
par MIdev
Hello
two suggestions:
uses an NK file maybe someone else before you install it on your medianav to start under Windows.
use UCL2 file to boot into Windows
after this procedure to access Windows, you must use the micom manager to reconfigure your medianav
Re: Connect diag tool 4.1.0
Posté : lun. janv. 30, 2023 7:52 pm
par Pixon12
Where can i get UCL2?
because this medianav was for me at first.
Re: Connect diag tool 4.1.0
Posté : lun. janv. 30, 2023 9:08 pm
par MIdev
Pixon12 a écrit : ↑lun. janv. 30, 2023 7:52 pm
Where can i get UCL2?
because this medianav was for me at first.
ULC2 :
Contenu caché
Vous devez être inscrit et connecté sur ce forum pour voir le contenu caché.
NK :
Contenu caché
Vous devez être inscrit et connecté sur ce forum pour voir le contenu caché.
copy the contents of the ULC2 folder and the NK file to the root of your USB
then insert it on your off medianav and start it.
it should block on the logo until getting the screen on windows.
Re: Connect diag tool 4.1.0
Posté : mar. janv. 31, 2023 12:05 am
par Pixon12
thank you. I will do it and report the result.
Re: Connect diag tool 4.1.0
Posté : mar. janv. 31, 2023 12:07 am
par MIdev
Pixon12 a écrit : ↑mar. janv. 31, 2023 12:05 am
thank you. I will do it and report the result.
your objective is to access Windows from the medianav in order to repair it, otherwise you must find an
OBD cable and DDT4ALL software
Re: Connect diag tool 4.1.0
Posté : jeu. févr. 02, 2023 12:41 am
par Pixon12
Hi. I copied the files into the root of flash without any folder & connected to MV & turned it on. But no change happened.
Re: Connect diag tool 4.1.0
Posté : ven. févr. 03, 2023 12:37 am
par Pixon12
Hi. Somewhere I read we could access win ce with "dboot 1.4" or "dboot 2"
But i cant find this anywhere for download
Re: Connect diag tool 4.1.0
Posté : ven. févr. 03, 2023 11:27 am
par MIdev
Dboot 4.1 :
Bootloader 4.1 :
if you can perform only one of these updates then you will be able to access Windows. but my experience I doubt !!
Re: Connect diag tool 4.1.0
Posté : ven. févr. 03, 2023 12:07 pm
par Pixon12
One of members that opened this topic, his name Cedric63, had exactly this problem & he could fix it with "bootloader" that you sent. Why i cant access windows ce. Maybe i do it wrong.
Now I should extract one of these & copy in root of flash & connect to MN? No need to any other file in addition to flash for access windows?
Just one of these 2 file?