Assistance Installation caméra de recul Clio 4

[MIdev]

Bonjour
show me your camera and the lines to tell you where to stumble the wires !

[claretandblue]

Bonjour
show me your camera and the lines to tell you where to stumble the wires !

I don't have a camera yet ! As you can see when reverse gear is engaged the screen changes, there is also already a wire in pin 3. So is all i need to do is put rca cable to pin 10 and 22 ?

[MIdev]

Yes juste RCA cable to pin 10 and 22
And you need supply for your futur camera

[claretandblue]

Yes juste RCA cable to pin 10 and 22
And you need supply for your futur camera

From which colour wires ? red and black power wires to what colour reverse light ?

[MIdev]

I'm talking about the reverse gear lights, it makes it easier for you to have 12+ to power your backup camera.

in other words, the rear view camera powers up just when you initiate reverse gear.

you must test the + not to burn out your camera

[claretandblue]

I've had a look, the reverse lights are red and black, so red power to red reverse and black power to ground.

[MIdev]

If you have a 12v lamp then you can distinguish the + file and the mass
otherwise a tension test tool because I don't remember
excuse me